Fort Langley, BC Mould Damage Remediation

It only takes a small water leak, or even excess humidity, for mould to form in your Fort Langley home or business. Then, mould can spread quickly through the property in as little as 48 hours. Mould can produce allergens and irritants, and it has the potential to cause other health effects. If your home or business has a mould problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mould infestation.

Learn more about mould and what to do until help arrives by reviewing these mould damage tips.

SERVPRO of Langley

If You See Signs of Mould, Call Us Today – (778) 552-7762

Understanding Mold

Microscopic mould spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mould from a home or business. Some restoration businesses advertise “mould removal” and even guarantee to remove all mould, which is a fallacy. Consider the following mould facts:

  • Mould is present almost everywhere, indoors and outdoors.
  • Mould spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mould spores thrive on moisture. Mould spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mould remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mould may return. 
  • Mould often produces a strong, musty odor and can lead you to possible mould problem areas.
  • Even higher-than-normal indoor humidity can support mould growth. Keep indoor humidity below 45 percent.

Faster to Any Size Fire Disaster

A minor mould problem can quickly become a major infestation if left untreated. We can start the remediation process immediately after you contact us. A faster response lessens the mould damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

SERVPRO of Langley is locally owned and operated, so we are part of the Fort Langley community too. When you have a water or mould damage issue, we’re already nearby and ready to help. We’re also part of a network of over 1,700, including special Disaster Recovery Teams placed strategically throughout the country to respond to large-scale fire, water, and storm disasters.

We proudly serve Langley, BC, Fort Langley, BC, Aldergrove, BC, and surrounding areas.

Highly Trained Water and Mould Restoration Specialists

We are trained mould damage specialists who get started quickly to get your home or business back to normal, with specific training and certifications to handle your restoration needs. Learn about our water and mould training and certificates.

The Mould Remediation Process

Every mould damage scenario is different and requires a unique solution, but the general mould remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (778) 552-7762

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mould Damage Assessment

We carefully inspect your property for visible signs of mould. Mould feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mould and hidden water sources.

Step 3: Mould Containment

To keep the mould spores from spreading further, we will use various mould containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Fort Langley, BC home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mould.

Step 4: Air Filtration

Our specialized filtration equipment allows our professionals to capture microscopic mould spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mould spores while the mould remediation is in process. 

Step 5: Removing Mould and Mould-Infested Materials

The mould remediation process depends on the amount of mould growth and the types of surfaces on which the mould appears. We’ll use antifungal and antimicrobial treatments to eliminate mould colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mould-infested porous materials, like drywall and carpeting, to remediate heavy mould growth.

Step 6: Cleaning Contents and Sanitizing

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mould, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odours and provide deodourisation using fogging equipment.

Step 7: Restoration

Depending on the level of mould damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

SERVPRO knows Mould

In Fort Langley, BC, SERVPRO of Langley is ready to tackle and resolve any mould issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers mould. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any mould job. Reach us at (778) 552-7762 - We’re ready to activate our team to remediate your mould.