Mould Damage Remediation in Langley, BC

When a home suffers a water damage event, a mould infestation can quickly arise and spread throughout a home in 48-72 hours. Because mould can produce allergens and irritants, you will want a professional that has training and experience to properly resolve the mould infestation. If you suspect that your Langley home or business has a mould problem, SERVPRO of Langley can inspect, assess and remediate your property.

Learn more about mould and what to do until help arrives by reviewing these mould damage tips.

SERVPRO of Langley

If You See Signs of Mould, Call Us Today – (778) 552-7762

Understanding Mold

Confusion and misunderstanding surround the topic of mould and mould remediation. Some restoration businesses even make claims to remove all mould from a building. This is a fallacy. Mould spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:

  • Mould is present almost everywhere, indoors and outdoors.
  • Mould spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mould spores thrive on moisture. Mould spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mould remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mould may return. 
  • Mould often produces a strong, musty odor and can lead you to possible mould problem areas.
  • Even higher-than-normal indoor humidity can support mould growth. Keep indoor humidity below 45 percent.

Faster to Any Size Emergency

In as little as 48 hours, a minor mould issue can quickly spread through a home or business. Once you contact us, we’re dedicated to starting the remediation process quickly. This fast response lessens the mould damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Langley is close by and ready to respond to your mould damage emergency. We are proud to be an active member of the Langley community and want to pitch in and help make our community the best it can be.

We proudly serve Langley, BC, Fort Langley, BC, Aldergrove, BC, and surrounding areas.

Highly Trained Water and Mould Restoration Specialists

As water and mould damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly. Learn about our water and mould training and certificates.

The Mould Remediation Process

Every mould damage scenario is different and requires a unique solution, but the general mould remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (778) 552-7762

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mould Damage Assessment

We determine the scope of the mold damage by carefully inspecting your property for visible signs of mould. Since mold can be hidden, we use various technologies to detect mould and hidden water sources. 

Step 3: Mould Containment

To keep the mould spores from spreading further, we will use various mould containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Langley, BC home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mould.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mould spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mould spores while the mould remediation is in process.

Step 5: Removing Mould and Mould-Infested Materials

Depending on the amount of mould growth and the types of surfaces involved, the mould remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate mould colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.

Step 6: Cleaning Contents and Sanitizing

SERVPRO of Langley will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since mould infestations also cause a persistent musty odor, our professionals are also trained to remove odours and provide deodourisation using fogging equipment.

Step 7: Restoration

Depending on the level of mould damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

SERVPRO knows Mould

SERVPRO of Langley has the expertise to make any mould problem a memory in Langley, BC. We have seen the distress homeowners experience upon finding mould at their property. SERVPRO can help calm any mould concerns. Our trained professionals have the equipment and knowledge it takes to properly remediate mould. Call (778) 552-7762 - We are ready and waiting to respond to your emergency.